CONTROL PANELS AND FIRE DETECTORS

Fire control and indicating equipment PPKPU 4/16 "AIST" intended to be used in fire alarm systems (FA) and automatic fire-control units (AFC).

FA protection is from 4 to 256 zones, AFC protection - from 1 to 16 zones.

Active and passive point annunciators are connected to the fire alarm loop.

Specifications PCPU 4/16-4

  • The inclusion of fire suppression systems in two clicks (in manual mode)
  • Data transfer Protocol: ModBUS
  • The number of controlled device circuits PS – 256
  • The number of modular AUPT managed by the device – up to 16
  • The number of routes to the centralized AUPT – up to 16
  • The number of UPS connected to one signal line connection – up to 16
  • The number of loops of the PS, connected to one UPS – up to 4
  • The number of fire zones be protected by a single TF – 1
  • The number of loops of the PS, connected to one TF – 3
  • The number of controllable FAC starting circuits – up to 4
  • The number of controllable FAC sets of sirens – 2
  • The number of UDU connected to the Device – up to 16
  • The number of the MOUTH that connect to the Instrument – 1
  • The number of managed MOUTH starting circuits – up to 8
  • The number of pieces of equipment (EDM, valve, gate valve,etc.) managed one UDU – 1
  • The number of signal lines connected to the Device – up to 4
  • The inertia of the Instrument without time delay, sec – 1

Overall dimensions of the Device and address devices:

  • PCPU 4/16-4 360-280-139 mm;
  • UPS 210-131-74 mm;
  • UPT 344-260-112 mm;
  • UDU 210-131-74 mm;
  • UST 331-260-112 mm.

Weight of the Device and addressable devices (with batteries), not more than:

  • PCPU 4/16-4 7.5 kg;
  • UPS 1.5 kg;
  • UPT 5.5 kg;
  • UDU 1.5 kg;
  • UST 5.7 kg.